Selamat datang di steelindonesia.com,  Daftar Masuk 
 
Beranda » Produk

Artikel Produk

Indikasi Harga

Page 1 of 1285

VIBRATING SCREEN

PT.  hastasakti sejati
Kota Adm. Jakarta Timur, DKI Jakarta
T/F : +62218403639 | +62218406809

Hubungi Perusahaan | Detail Kontak


Girder Bridge

A girder bridge, in general, is a bridge built of girders placed on bridge abutments and foundation piers. In turn, a bridge deck is built on top of the girders in order to carry traffic.

PT.  duta cipta pakarperkasa
Kota Surabaya, Jawa Timur
T/F : +62 31 8433880 | +62 31 8411371

Hubungi Perusahaan | Detail Kontak


Lug Butterfly Valves

PT. Abadi Metal Utama menyediakan Lug Butterfly Valves. Kunjungi www.abadimetalutama.com untuk informasi selanjutnya.

PT.  abadi metal utama
Kota Surabaya, Jawa Timur
T/F : +62 31 7317975 | +62 31 7325030

Hubungi Perusahaan | Detail Kontak


Armco/Corrugated Steel Pipe

Apakah itu Corrugated Steel Pipe / Armco?

  • Plat Baja (SS400 - SPHC) yang telah mengalami proses pembentukan  gelombang (Corrugation),  dan pelengkungan (Curving) serta di coating dengan sistem Hot Dip Galvanize setelah di pabrikasi.
  • Dibuat bergelombang agar menghasilkan momen inertia  yang besar sehingga dengan tebal plat yang tipis dapat menahan beban yang cukup besar.

Keuntungan menggunakan Corrugated Steel Pipe :

  • Memenuhi standard test baik chemical analysis, physical properties dan ketebalan galvanize.
  • Transportasi yang mudah dan murah.
  • Umur pelayanan yang tinggi à Coating Hot Dip Galvanize.
  • Cost Efficiency :

-             60 ~ 70% lebih murah dibandingkan beton.

-             Tidak memerlukan tenaga ahli & pengawasan minimal

-             Proses perakitan yang cepat dan mudah.

-             Cocok untuk project cash program.

  • Material ramah lingkungan : 100% recyclable.
  • Tahan gempa karena menggunakan sistem Bolt Connection.
  • Sesuai untuk kondisi tanah gambut

Spesification:

 spesifikasi armco corrugated steel pipe

chemical mechanical armco


Aplikasi Corrugated Steel Pipe / Armco: 

  • Saluran drainase / Culvert
  • Jembatan
  • Tutup Conveyor
  • Silo
  • Underpass
  • Stockpile Tunnels
  • Sdan Tunnel di berbagai kondisi tanah.

 

Dimensi dan Jenis dari Corrugated Steel Pipe :

A. Type Nestable Flange E-100

 Nestable Flange E-100

 

B. Type Multi Plate

 

 

 

Untuk informasi lebih lanjut, dapat menghubungi:

nomor 081399691694 dan email : marketing@pt-cmp.com

PT.  cahaya metal perkasa
Kota Bekasi, Jawa Barat
T/F : 622182492111 | 622182495222

Hubungi Perusahaan | Detail Kontak


SWRM 8, SWRM 10, SWRH52A, SWRH 62A, SWRH 67B, SWCH 8A, SWCH 10A, SWCH 18A, Kawat ikat, Galvanize, Kawat Bakar, Stainless Steel, Bendrat.

PT.  multi steel diluch
Kab. Tangerang, Banten
T/F : +62 82221119594 | 02129437965

Hubungi Perusahaan | Detail Kontak


SWRM 8, SWRM 10, SWRH52A, SWRH 62A, SWRH 67B, SWCH 8A, SWCH 10A, SWCH 18A, Kawat ikat, Galvanize, Kawat Bakar, Stainless Steel, Bendrat. / PT Multi Steel DIluch

PT.  multi steel diluch
Kab. Tangerang, Banten
T/F : +62 82221119594 | 02129437965

Hubungi Perusahaan | Detail Kontak


Nako

Nako, Bahan Bangunan , CV Awijaya, Besi Palembang

CV.  awijaya
Kota Palembang, Sumatera Selatan
T/F : +62 711 313489 | +62 711 371015

Hubungi Perusahaan | Detail Kontak


WIN SPEED Magnetic Core Drill Machine

Type WS-3500M WS-4500M WS-6000M

Magnetic Core Drill Machine

ws
SPECIFICATIONS :
Model
WS-3500M
Voltage (Single Phase)
220 ~ 240V AC 50 / 60 Hz
Motor Power Consumption
1100 W
No-load Speed
780 rpm
Height for max. stroke
100 mm
Coolant Supply
Via Tool Holder
Magnet Power Consumption
38 W
Magnet Adhesion
7350 N / 750 kgf
Magnet Dimensions
186 mm x 80 mm x 58 mm
Weight
14 kg
T.C.T. Broach Cutter
Hole Diameter
Plate Thickness
14-35 mm
9-50 mm
Twist Drill
1-13 mm

features

  • Designed to use T.C.T. Broach Cutter.
  • Cuts up to diameter 35 mm and 50 mm deep.
  • Serves as two types of drilling that allows loading in a “Broach Cutter” or change with drill chuck for loading “Twist Drill or Hole Saw”.
  • Bearing Bracket aligns cutters precisely, which increases cutter and motor life. Also utilized with roller bearing for increase main shaft stability and avoid motor and shaft sway easily.
  • The roller bearing design that lowers down damage. The cutter no needs to change many times and save the cost also increase cutter life.
  • Designed with double coil magnetic base when has power the in front of coil will start. This design is for adjust to point the accuracy position on work sheet. When any one coil burning that still keeps another and avoid danger. It’s high safety.
  • Designed with electronic switch that can adjust an electric current and keep the voltage. The stability will higher than traditional switch.
  • Light weight, only 14 Kg.

Magnetic Core Drill Machine

ws4500m
SPECIFICATIONS :
Model
WS-4500M
Voltage (Single Phase)
220 ~ 240V AC 50 / 60 Hz
Motor Power Consumption
1850 W
No-load Speed
650 ~ 720 rpm
Tool Adaptor Inner Diameter
19 mm
Adjustable in height for max. stroke
100 mm
Magnet Power Consumption
via Tool Holder
Magnet Adhesion
38 W
Magnet Dimensions
188 mm x 86 mm x 56 mm
Weight
15 kg
T.C.T. Broach Cutter
Hole Diameter
Plate Thickness
18-45 mm
9-50 mm
Twist Drill
1-13 mm

features

  • Designed to use T.C.T. Broach Cutter.
  • Cuts up to diameter 45 mm and 50 mm deep.
  • Serves as two types of drilling that allows loading in a “Broach Cutter” or change with drill chuck for loading “Twist Drill or Hole Saw”.
  • Bearing Bracket aligns cutters precisely, which increases cutter and motor life. Also utilized with roller bearing for increase main shaft stability and avoid motor and shaft sway easily.
  • The roller bearing design that lowers down damage. The cutter no needs to change many times and save the cost also increase cutter life.
  • Designed with double coil magnetic base when has power the in front of coil will start. This design is for adjust to point the accuracy position on work sheet. When any one coil burning that still keeps another and avoid danger. It’s high safety.
  • Designed with electronic switch that can adjust an electric current and keep the voltage. The stability will higher than traditional switch.
  • Light weight, only 15 Kg.

Magnetic Core Drill Machine

ws_2
SPECIFICATIONS :
Model
WS-6000M
Voltage (Single Phase)
220 ~ 240V AC 50 / 60 Hz
Motor Power Consumption
1850 W
No-load Speed
750 rpm
Dia. 13 mm~35 mm
450 rpm
Dia. 36 mm~60 mm
Tool Adaptor Inner Diameter
19.05 mm
Height for max. stroke
135 mm
Coolant Supply
Via Tool Holder
Magnet Power Consumption
85 W
Magnet Adhesion
22540 N / 2300 kgf
Magnet Dimensions
210mm x 100mm x 64mm
Weight
23 kg
Hole-Cutting Capacity
T.C.T. Broach Cutter
Hole Diameter
Plate Thickness
18-60 mm
6-75 mm
Twist Drill
Max. Dia 16 mm

PT.  abadi baru teknikatama
Kota Administrasi Jakarta Utara , Jakarta
T/F : +62 21 6604409 | +62 21 6626768

Hubungi Perusahaan | Detail Kontak


Round / Deform / Besi Beton (Perwira Adhitama Sejati)
  • Plain Bar
  • Deform Bar

PT.  perwira adhitama sejati
Kota Administrasi Jakarta Utara , Jakarta
T/F : +62 21 6671199 | +62 21 6671198

Hubungi Perusahaan | Detail Kontak


CNC Plate Drilling Machine Model TPD2012

 

Applicable Industry:

It is used to drilling holes on the metal plate of building steel structure, power iron tower and petrochemical equipments.

1. Introduction:

1.1 It adopts gantry type structure. The axis X, Y and Z are drove by servo motor through precise ball guide screw. It positions automatically, precisely and quickly and finishes the processing of drilling automatically. Therefore, it highly improves the precision and speed. Meanwhile, it avoids repairing and scraping caused by manual position or drilling error.

1.2 The control system of this machine adopts host computer and PLC control system. The computer is installed with automatic programming software and machine monitoring software, which can convert the AUTOCAD graph file to processing program directly. It also very fast and easy, even programs it manually. The new operator without experiences of operating computer can program it in short time.

1.3 Automatic chip removal and circulation cooling system reduce the nonproductive time and labor intensity. The operator only need to load and unload work piece and change the drills.

1.4 The advanced CNC drilling power heads can automatically adjust to optimizing feeding speed and rotational speed through computer control according to different diameter of holes. It also can be adjusted manually according to different conditions. Besides to processing through-hole, it also can process blind holes, counter bore and so on. It has quick chuck device, which make the drills go up and down easily, conveniently and quickly. We also supply Morse 3#, 2# drilling reducing sleeves, which fit for below φ50mm twist drills.

1.5 This CNC drilling machine is designed according to the work piece features and precision requirements; it has compact form and is flexible, it meets the processing requirements better. No matter the holes are arranged as circle or straight line, it can finish the work quickly and accurately. Therefore, this machine is cost-effective choice.

2.    specifications:

Name

Specifications

machine type

Gantry moveable single spindle CNC drilling machine

Max work piece size (L×W)

2000×1200mm1 piece

1200×1000mm2 pieces

1000×600mm4 pieces

If work piece is small size, it can be overlapped and processed at the same time.

Thickness of work piece

5~100mm

Height from table top to ground

800mm

Drill unit type

sliding table, servo control

Clamp type

Hydraulic clamp with 12 clamps

Drill head quantity

1

Max drill diameter

Φ50mm

Power of main motor

5.5 kW

Spindle speed

120500r/min (frequency control)

Spindle vertical stoke (Z axis)

350mm

Drive mode of gantry longitudinal (X axis)

Guided by linear rolling guide; driven by AC servo motor and ball screw pairs.

Servo motor power of X axis

1.3 kW

Power head lateral driving type (Y axis)

Guided by linear rolling guide; driven by AC servo motor and ball screw pairs.

Servo motor power of Y axis

1. 3 kW

Servo motor power of Z axis

0.85 kW

Motor power of chip cleaner

0.4 kW

Motor power of cooling system

0.45 kW

Motor power of Hydraulic station

3.7kW

Clamping type

Attach Morse 4# quick chuck and 3#, 2# reducing sleeve

Electric control cabinet

With dustproof ventilating device and LENOVO computer

Electric control type

MISTUBISHI PLC

CNC axis quantity

3

With function of CAD/CAM automatic generation

with function of hole site memory (memory hole site if power off suddenly) and drill pause

Total power

≈13 kW

Total weight

≈7 t

Overall dimension

3990×2121×2780

jinan sunrise cnc machine , Co. LTd
Jinan, Shandong
T/F : 8653155611277 | 8653155611266

Hubungi Perusahaan | Detail Kontak


Workshop

Workshop is a commercial building for work and place form machines. DCP produces steel construction for workshop that meet your requirements.

PT.  duta cipta pakarperkasa
Kota Surabaya, Jawa Timur
T/F : +62 31 8433880 | +62 31 8411371

Hubungi Perusahaan | Detail Kontak


Kawat Bronjong / Gabions
Penggunaan kawat bronjong
  • pencegahan erosi pada tanggul sungai
  • pelindung keluaran gorong gorong
  • pelindung penyangga jembatan
  • perlindungan garis pantai
PT Abadi Metal Utama menjual kawat bronjong pabrikasi ( kawat bronjong mesin ) dengan standar SNI 03-0090-1999 dan kawat bronjong PVC dengan standar SNI 03-3046-1992. Kami juga menerima pesanan bronjong dengan ukuran khusus.
Ukuran kawat bronjong ( gabions ) pabrikasi :
  • Kawat Bronjonng 2 meter x 1 meter x 0.5 meter
  • Kawat Bronjong 2 meter x 1 meter x 1 meter
  • Kawat Bronjong 3 meter x 1 meter x 0.5 meter
  • Kawat Bronjong 3 meter x 1 meter x 1 meter
  • Kawat Bronjong 4 meter x 1 meter x 0.5 meter
  • Kawat Bronjong 4 meter x 1 meter x 1 meter
Ukuran lubang kawat bronjong adalah 80 mm x 100 mm dan 100 mm x 120 mm dengan ketebalan kawat hot dip galvanis 2.7 mm dan 3 mm 

PT.  abadi metal utama
Kota Surabaya, Jawa Timur
T/F : +62 31 7317975 | +62 31 7325030

Hubungi Perusahaan | Detail Kontak


Single Sphere Flexible Rubber Joint with Foating Flanges

No.

Parts

Materials

1

Flange

Ductile Iron(32-300)

Mild Steel(350-600)

3

Inner Rubber

Synthetic Rubber

4

Outer Rubber

Synthetic Rubber

5

Reinforcing Cord

Synthetic Fiber

Flange with SS400 and DI in JIS 10K, ANSI 150, PN 16 are standard. For other flanges, please consult us. ANSI Flange type for 32 mm is not produced. Flange material can be changed to SUS304 AND SUS316. Kunjungi www.abadimetalutama.com untuk informasi selanjutnya.

PT.  abadi metal utama
Kota Surabaya, Jawa Timur
T/F : +62 31 7317975 | +62 31 7325030

Hubungi Perusahaan | Detail Kontak


Tee

PT. Abadi Metal Utama menyediakan Tee. Kunjungi www.abadimetalutama.com untuk informasi lebih lanjut.

PT.  abadi metal utama
Kota Surabaya, Jawa Timur
T/F : +62 31 7317975 | +62 31 7325030

Hubungi Perusahaan | Detail Kontak


HEMPASIL NEXUS 27310

Description
HEMPASIL NEXUS 27310 is a three-component silicone-based tie coat for HEMPASIL fouling release top coats, 77500 and 87500.

Area of use
As a tie coat for the HEMPASIL fouling release system, securing adhesion between the anticorrosive system and the HEMPASIL FOULING RELEASE top coat.

Segments
Marine

PT.  hempel indonesia
Bekasi, Jawa Barat
T/F : +62 21 8843385 | +62 21 8840820

Hubungi Perusahaan | Detail Kontak

Page 1 of 1285